Insulation in Menlo Park, CA
Crawl space encapsulation and vapor barrier installation in Menlo Park typically runs $3,800-$7,500 for a full encapsulation with dehumidification, while radiant barrier installation in attics starts around $1,200-$2,800 depending on roof complexity. Most Menlo Park jobs we dispatch from our San Francisco Bay Area office can be estimated same-day and scheduled within a week. Call (669) 259-0406 for a written price before any work starts.
Menlo Park’s post-WWII ranch homes were built with little to no wall insulation because Peninsula builders assumed the mild climate made it unnecessary. Now those same homes sit on $2-4M+ lots, owned largely by tech-industry professionals who demand high-performance spray-foam and air-sealing retrofits and can justify the premium cost. This creates an insulation market in Menlo Park that is less about utility savings and more about performance, indoor air quality, and permit-driven Title 24 compliance on major renovations. We treat air sealing as a hard prerequisite, not an upsell, and publish before-and-after blower-door numbers on every applicable job.
Why Menlo Park Homes Are Different
The dominant housing stock in Menlo Park is 1950s-1970s California ranch-style single-family homes with shallow crawl spaces, minimal attic depth, and original wood-frame walls that are frequently uninsulated or filled only with deteriorated fiberglass batts. A significant number of homes have been partially gut-renovated, leaving a patchwork of modern and original uninsulated sections that require blower-door testing to map properly.
Menlo Park sits in a marine-influenced microclimate where summer afternoons can be 15-20°F warmer than coastal Pacifica, but persistent Bay-area fog and overnight marine layer keep humidity elevated year-round. Crawl spaces near the Baylands in the Belle Haven and east-of-101 neighborhoods accumulate ground moisture that degrades unbacked batts and requires encapsulation combined with insulation on the same job. Contractors pulling permits in Menlo Park frequently encounter the Title 24 “whole-house” trigger: once a renovation crosses the square-footage threshold, the city enforces California Energy Code on the entire envelope, turning what a homeowner thought was a kitchen remodel into a mandatory attic and wall insulation upgrade.
Our Main Menlo Park Services
Menlo Park homeowners call us most often about attic performance and spray-foam retrofits. These three services have dedicated Menlo Park pages with full pricing and project details.
Attic Insulation in Menlo Park
Most Menlo Park attics we inspect have shallow joist bays, original fiberglass batts compressed below current R-value requirements, and significant thermal bypass at top plates and recessed can lights. We begin with a blower-door test to quantify air leakage, then seal before insulating. Attic Insulation in Menlo Park covers our full process, from air-sealing through final documentation.
Spray Foam Insulation in Menlo Park
Spray foam is the preferred solution for Menlo Park’s uninsulated wall cavities and complex rooflines where batts cannot achieve full contact. We use open-cell and closed-cell formulations from Icynene and Demilec, selected by building science rather than brand preference. Spray Foam Insulation in Menlo Park details our approach to Title 24 compliance and whole-envelope upgrades.
Blown-In Insulation in Menlo Park
Blown-in cellulose and fiberglass are cost-effective for topping off existing attic insulation in Menlo Park’s ranch homes, especially where joist bays are irregular or obstructed. We specify Knauf Jet Stream or GreenFiber cellulose based on the moisture profile of the attic. Blown-In Insulation in Menlo Park explains our density and coverage requirements.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Menlo Park
Menlo Park’s shallow crawl spaces, particularly in 1950s-1970s ranch homes near the Baylands and east-of-101, were built with dirt floors and minimal ventilation that traps marine-layer moisture against floor joists and subflooring. We regularly find saturated fiberglass batts hanging below joists in Belle Haven and the Willows, where ground moisture wicks upward and degrades insulation R-value while promoting mold and wood rot. Crawl Space Encapsulation & Vapor Barrier is our primary service for these conditions because sealing the envelope at the foundation level protects everything above it.
Crawl Space Vapor Barrier
Signs you need it
Your crawl space has standing water after rain, white mineral deposits (efflorescence) on the foundation walls, or a persistent musty smell that enters the living space through floor gaps.
What it costs in Menlo Park
A 6-mil to 20-mil vapor barrier installed over bare dirt in a typical Menlo Park ranch crawl space runs $1,800-$3,500 depending on square footage, pier-and-post count, and whether we seal to the walls or simply cover the floor.
How we do it
We remove debris and grade the soil, lay overlapping polyethylene sheeting sealed at seams with mastic tape, extend it 6-12 inches up foundation walls, and anchor to a pressure-treated wood fastening strip so the barrier stays positioned during future plumbing or electrical access.
Crawl Space Encapsulation
Signs you need it
Your HVAC ducts run through the crawl space and sweat condensation, your hardwood floors cup or crown seasonally, or you’ve had rodent activity that has compromised the vapor barrier and insulation.
What it costs in Menlo Park
Full encapsulation with sealed vapor barrier, rigid foam wall insulation, conditioned access, and dehumidification for a typical Menlo Park crawl space ranges $5,500-$11,000, with larger or heavily obstructed spaces at the upper end.
How we do it
We install a reinforced vapor barrier across floor and walls, seal all seams and penetrations with closed-cell spray foam, insulate the rim joist and access door, and add a commercial dehumidifier sized to the volume with a condensate pump to the exterior, then provide before-and-after moisture readings.
What Crawl Space Encapsulation & Vapor Barrier Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Vapor barrier (dirt floor, 6-20 mil) | $1,800 - $3,500 |
| Full encapsulation with dehumidifier | $5,500 - $11,000 |
| Crawl space insulation (rigid foam + batts) | $2,500 - $5,000 |
Do I need a dehumidifier with encapsulation in Menlo Park?
Yes, we recommend one. Menlo Park’s marine layer keeps relative humidity elevated even in summer, and a sealed crawl space without mechanical dehumidification will still reach moisture levels that risk mold growth. We size the unit to your crawl space volume and include a condensate pump.
How long does crawl space encapsulation take in Menlo Park?
Most Menlo Park ranch homes take 2-4 days for full encapsulation, assuming standard access and no active water intrusion requiring drainage correction first. Call (669) 259-0406 for a written scope and timeline - estimates are free.
Radiant Barrier Installation in Menlo Park
Menlo Park’s afternoon temperature spikes, especially in west-facing homes near Alameda de las Pulgas and the foothills, can push attic temperatures past 140°F even when outdoor highs are moderate. Radiant barrier installation reduces the radiant heat transfer from roof deck to attic floor by 20-40%, which is particularly valuable in homes with HVAC ducts or air handlers located in the attic. Radiant Barrier Installation is often combined with air sealing and additional insulation for a complete thermal upgrade.
Attic Radiant Barrier
Signs you need it
Your upstairs rooms are uncomfortably warm by late afternoon, your air conditioner runs continuously on sunny days, or your attic floor insulation is performing well but the living space still gains heat.
What it costs in Menlo Park
Radiant barrier foil stapled to attic rafters in a typical Menlo Park ranch runs $1,200-$2,800, with complex rooflines, steep pitches, or limited access adding labor time.
How we do it
We install perforated radiant barrier foil across the underside of roof rafters with an air gap above and below, ensuring at least 3/4-inch clearance from the deck to allow attic ventilation to function, and we verify with a thermal camera that the barrier is continuous at valleys and hips.
Radiant Barrier Roof Deck
Signs you need it
You’re re-roofing or have the roof deck exposed during a major renovation, and you want the most effective radiant barrier installation with the cleanest attic appearance.
What it costs in Menlo Park
Radiant barrier roof deck sheathing, installed during re-roofing or new construction, typically adds $1,500-$3,200 to the roofing scope for a Menlo Park home, depending on roof square footage and pitch complexity.
How we do it
We specify OSB or plywood sheathing with a factory-applied radiant barrier surface, install it with the reflective side down facing the attic airspace, and detail the edges to maintain the required ventilation path from soffit to ridge.
What Radiant Barrier Installation Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Attic radiant barrier (foil on rafters) | $1,200 - $2,800 |
| Radiant barrier roof deck sheathing | $1,500 - $3,200 |
| Radiant barrier with attic air sealing package | $2,800 - $5,500 |
Does radiant barrier work with Menlo Park’s foggy mornings?
Yes, radiant barrier functions on temperature differential, not sunlight alone. Even on overcast days, your roof deck is warmer than the attic air, and the barrier still reduces radiant transfer. The bigger factor is afternoon solar gain, which is significant in Menlo Park’s inland microclimate.
Can radiant barrier be installed over existing insulation?
Yes, we typically install it on rafters above the insulation plane, so existing attic floor insulation stays in place. We inspect first for compressed or degraded batts that should be addressed simultaneously. Call (669) 259-0406 for a written assessment.
Insulation Removal & Replacement in Menlo Park
Menlo Park’s older ranch homes often contain original fiberglass batts that have settled, been disturbed by prior trades, or contaminated by rodent activity common in the Baylands and downtown neighborhoods. Partial renovations leave patchwork insulation that creates thermal boundaries in the wrong places, and we frequently find vermiculite in pre-1980 attics that requires testing before disturbance. Insulation Removal & Replacement begins with a documented photo record of existing conditions and ends with a written scope of what was installed.
Contaminated Insulation Removal
Signs you need it
Your attic insulation has visible rodent droppings, urine staining, or mold growth, or you smell ammonia or mustiness when the HVAC system runs.
What it costs in Menlo Park
Contaminated insulation removal with HEPA containment, PPE protocols, and proper disposal in Menlo Park runs $2,500-$5,500 for a typical ranch attic, with severe contamination or limited access at the upper end.
How we do it
We establish negative air pressure with HEPA filtration, remove contaminated material in sealed bags, apply an enzymatic sanitizer to affected surfaces, and provide photos of the cleaned substrate before any new insulation is installed.
Insulation Replacement
Signs you need it
Your existing insulation is compressed below the joist tops, has visible water staining or mold, or was installed before 1990 and may contain degraded binders or obsolete materials.
What it costs in Menlo Park
Insulation replacement with new fiberglass or cellulose batts in a Menlo Park ranch attic typically runs $3,000-$6,500 including removal, disposal, and installation to current Title 24 R-value requirements.
How we do it
We remove old material, inspect and air seal the attic floor, install baffles at eaves for ventilation, then place new insulation to uniform depth with a documented coverage map and final blower-door test if air sealing was performed.
What Insulation Removal & Replacement Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Contaminated insulation removal | $2,500 - $5,500 |
| Insulation replacement (attic, batts/cellulose) | $3,000 - $6,500 |
| Vermiculite testing and removal (if positive) | $4,500 - $9,000 |
Is vermiculite common in Menlo Park attics?
We encounter it regularly in homes built 1945-1980, which describes much of Menlo Park’s housing stock. We test before disturbing any granular gray insulation that could be vermiculite; if positive, abatement follows strict EPA protocol with third-party clearance.
Can I add new insulation over old insulation in Menlo Park?
Only if the existing material is dry, uncompressed, and uncontaminated. In Menlo Park’s humid microclimate, we often find moisture-compromised batts that should be removed first. We document the condition and provide a written recommendation before any work starts.
Attic Air Sealing in Menlo Park
Menlo Park’s ranch homes with minimal original insulation almost always have equally minimal air sealing at top plates, recessed can lights, and plumbing and electrical penetrations. The result is conditioned air leaking into attics year-round, which is especially costly in homes with heat pumps or mini-splits that struggle to recover from setback temperatures. Attic Air Sealing is the prerequisite step we complete before adding any insulation, and we verify results with a blower-door test.
Top Plate & Penetration Sealing
Signs you need it
You feel drafts at interior wall-ceiling joints, your attic insulation is darkened with dust streaks indicating air movement, or your blower-door test shows excessive leakage at the attic floor plane.
What it costs in Menlo Park
Top plate and penetration sealing for a typical Menlo Park ranch attic runs $1,800-$3,500, with complex rooflines, numerous can lights, or balloon framing construction at the upper end.
How we do it
We access top plates by moving insulation aside, seal all gaps with expanding foam or acoustic sealant depending on gap size, seal around wire and pipe penetrations with fire-rated caulk, and replace insulation without compression.
Can Light & Duct Boot Sealing
Signs you need it
Your recessed can lights are not IC-rated airtight fixtures, you feel conditioned air entering the attic at duct connections, or your energy bills spike when the HVAC runs despite adequate insulation depth.
What it costs in Menlo Park
Sealing non-IC can lights with approved covers and mastic-sealing duct boots in a Menlo Park attic typically adds $800-$2,200 to the air-sealing scope, depending on fixture count and duct configuration.
How we do it
We install fire-rated airtight covers over each can light, seal with high-temperature caulk, apply mastic sealant to all duct boot connections, and pressure-test the duct system if leakage is suspected.
What Attic Air Sealing Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Top plate and penetration sealing | $1,800 - $3,500 |
| Can light and duct boot sealing | $800 - $2,200 |
| Full attic air sealing with blower-door test | $2,800 - $5,500 |
Will air sealing make my attic too humid in Menlo Park?
No, we maintain ventilation paths from soffit to ridge and verify with a blower-door test that we haven’t over-sealed. Menlo Park’s marine climate requires balanced attic ventilation, which we inspect and correct if baffles are missing or blocked.
How much does air sealing reduce my energy bills in Menlo Park?
Most Menlo Park homeowners see 15-25% reduction in heating and cooling costs after comprehensive attic air sealing, with the greatest impact in homes with ductwork in the attic. We provide before-and-after blower-door numbers so you can verify the improvement. Call (669) 259-0406 for a written estimate.
Wall Insulation in Menlo Park
Menlo Park’s post-WWII ranch and minimal-construction homes were routinely built with empty wall cavities because builders assumed the Peninsula climate made insulation unnecessary. Now these same walls create thermal bypasses that make rooms uncomfortable and trigger Title 24 compliance requirements when renovations cross the threshold. Wall Insulation for these homes requires careful assessment of existing conditions and selection of the right fill material for each cavity type.
Drill & Fill Wall Insulation
Signs you need it
Your exterior walls are cold to the touch in winter, rooms on the north side of the house are consistently cooler, or an infrared camera shows empty cavities during an energy audit.
What it costs in Menlo Park
Drill-and-fill with dense-pack cellulose or fiberglass in a typical Menlo Park ranch runs $3,500-$7,500 for the full exterior envelope, with stucco or brick cladding requiring more invasive access methods at higher cost.
How we do it
We drill 2-inch holes at stud bay intervals, either from interior or exterior depending on cladding type, blow cellulose or fiberglass to specified density with a tube-and-fill method, then patch and match the finish surface.
Injection Foam Wall Insulation
Signs you need it
Your walls have irregular cavities, obstructions, or partial fills that prevent uniform dense-pack coverage, or you need both insulation and air sealing in a single application.
What it costs in Menlo Park
Injection foam for a complete Menlo Park ranch exterior wall system typically runs $5,500-$12,000, with open-cell foam at the lower end and closed-cell at the upper end based on R-value requirements and moisture management needs.
How we do it
We access walls through drilled ports or removable siding, inject slow-rise foam that fills around obstructions and wires, trim excess after cure, and verify fill completeness with thermal imaging before closing.
What Wall Insulation Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Drill-and-fill (dense-pack cellulose/fiberglass) | $3,500 - $7,500 |
| Injection foam (open-cell) | $5,500 - $9,500 |
| Injection foam (closed-cell) | $8,000 - $12,000 |
Do I need to remove interior drywall for wall insulation in Menlo Park?
Not usually. We drill and fill from either interior or exterior, patching afterward. Drywall removal is only necessary during a full gut renovation, which is when many Menlo Park homeowners combine wall insulation with Title 24 compliance upgrades.
Will wall insulation trigger a Title 24 whole-house requirement in Menlo Park?
It depends on what else is being renovated. If your project crosses the square-footage threshold, Menlo Park enforces envelope upgrades on the entire home. We review permit plans with you and flag this before pulling the permit so the scope is clear. Call (669) 259-0406 to review your project.
Attic Cleaning & Rodent Proofing in Menlo Park
Menlo Park’s mature tree canopy, proximity to open space, and mild climate support active rodent populations that frequently access attics through unsealed eaves, vent screens, and roof junctions. We find evidence of roof rat activity in attics across the city, from the Willows to Sharon Heights, often in homes where the insulation has been compromised by nesting and contamination. Attic Cleaning & Rodent Proofing restores the attic to a clean, sealed condition that protects both insulation performance and indoor air quality.
Attic Sanitizing & Decontamination
Signs you need it
Your attic has visible rodent droppings, urine stains on insulation or framing, or a persistent odor that enters the living space through recessed lights or HVAC returns.
What it costs in Menlo Park
Attic sanitizing and decontamination with HEPA vacuuming, enzymatic treatment, and disposal of compromised material in a typical Menlo Park ranch runs $2,000-$4,500, with heavy contamination or large attic footprints at the upper end.
How we do it
We remove contaminated insulation and debris, HEPA-vacuum all surfaces, apply an enzymatic sanitizer that neutralizes organic waste, and provide photos of the cleaned attic before any restoration work begins.
Rodent Proofing & Exclusion
Signs you need it
You hear scratching in walls or attic at night, find gnaw marks on fascia or soffits, or have had repeated pest control treatments that don’t address the entry points.
What it costs in Menlo Park
Rodent proofing with exclusion screening, sealant at all penetrations, and hardware cloth at vulnerable roof junctions for a typical Menlo Park home runs $1,500-$3,500, with complex rooflines or multiple entry points requiring more labor.
How we do it
We inspect the roof perimeter, eaves, vents, and utility penetrations with a detailed checklist, seal all entry points larger than 1/4 inch with rodent-resistant materials, install vent screens, and provide a written exclusion report with photos.
What Attic Cleaning & Rodent Proofing Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Attic sanitizing and decontamination | $2,000 - $4,500 |
| Rodent proofing and exclusion | $1,500 - $3,500 |
| Full attic restoration (cleaning + proofing + re-insulation) | $5,500 - $11,000 |
How do rodents get into Menlo Park attics?
Roof rats are excellent climbers and exploit gaps at eave junctions, unscreened vents, and utility penetrations. In Menlo Park’s mature neighborhoods with dense canopy, they travel tree-to-roof easily. We map every entry point during inspection and seal with materials they cannot chew through.
Should I clean the attic before or after rodent proofing?
After. Proofing first prevents re-contamination, then we clean and sanitize. If insulation is compromised, we remove it during cleaning and replace with new material after the space is sealed. Call (669) 259-0406 for a written scope and sequence.
Home Energy Audit in Menlo Park
Menlo Park’s patchwork of original and renovated homes creates complex thermal boundaries that are difficult to diagnose without pressurization testing and thermal imaging. A home energy audit identifies where conditioned air is being lost, which insulation is performing and which is not, and whether the HVAC system is delivering what it was designed to deliver. Home Energy Audit is the starting point for every major envelope project we undertake, and it provides the documentation many Menlo Park homeowners need for permit applications or contractor comparison.
Blower Door Test
Signs you need it
Your home feels drafty despite closed windows, rooms have uneven temperatures, or you’re planning a renovation and need baseline air-leakage data for permit compliance.
What it costs in Menlo Park
A standalone blower-door test with written report for a typical Menlo Park single-family home runs $450-$850, with larger homes or multi-zone testing at the upper end.
How we do it
We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, measure the airflow in CFM50, and use smoke pencils and thermal imaging to locate leakage paths while the house is under pressure.
Thermal Imaging Inspection
Signs you need it
You suspect missing or degraded insulation in walls or ceiling, you’ve had ice damming or moisture issues, or you want visual documentation of thermal defects before committing to insulation work.
What it costs in Menlo Park
Thermal imaging as part of a comprehensive energy audit typically adds $200-$400 to the base blower-door test, or $650-$1,200 for the full audit package with written recommendations.
How we do it
We scan all exterior walls, ceilings, and foundation areas with a FLIR camera during normal heating or cooling operation, identify thermal anomalies, and correlate them with blower-door data to distinguish air leakage from insulation gaps.
What Home Energy Audit Costs in Menlo Park
| Item | Typical range in Menlo Park |
|---|---|
| Blower-door test with written report | $450 - $850 |
| Full energy audit (blower door + thermal imaging + report) | $650 - $1,200 |
| Duct leakage test (included with full audit or standalone) | $350 - $650 |
Is a blower-door test required for Menlo Park permits?
Not always, but Title 24 compliance verification frequently requires it for major renovations. We provide the documentation in the format Menlo Park Building Division accepts, with before-and-after numbers if we’re doing the air-sealing work.
How long does a home energy audit take in Menlo Park?
Plan on 2-3 hours for a comprehensive audit of a typical ranch home, including setup, testing, thermal imaging, and a walkthrough of preliminary findings. The written report with prioritized recommendations follows within 48 hours. Call (669) 259-0406 to schedule.
Brands We Service in Menlo Park
We source insulation and air-sealing materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber. No proprietary product lock-in means we specify by building science and your home’s specific moisture and thermal profile, not by brand quota. Most materials are stocked regionally for standard Menlo Park jobs, with specialty orders arriving in 3-5 business days. See our brands for full specifications.
Pricing for Insulation in Menlo Park, CA
| Service | Typical range in Menlo Park |
|---|---|
| Crawl space vapor barrier | $1,800 - $3,500 |
| Crawl space encapsulation with dehumidifier | $5,500 - $11,000 |
| Radiant barrier (attic foil) | $1,200 - $2,800 |
| Radiant barrier roof deck sheathing | $1,500 - $3,200 |
| Contaminated insulation removal | $2,500 - $5,500 |
| Insulation replacement (attic) | $3,000 - $6,500 |
| Attic air sealing (top plates/penetrations) | $1,800 - $3,500 |
| Can light and duct boot sealing | $800 - $2,200 |
| Drill-and-fill wall insulation | $3,500 - $7,500 |
| Injection foam wall insulation (open-cell) | $5,500 - $9,500 |
| Attic sanitizing and decontamination | $2,000 - $4,500 |
| Full home energy audit | $650 - $1,200 |
Prices in Menlo Park trend toward the upper end of regional ranges due to access challenges in mature neighborhoods, Title 24 documentation requirements, and the prevalence of high-performance material specifications. Every job begins with a written price under Haven Standard Clause 1 - flat price, written scope, written warranty before anyone lifts a tool.
Neighborhoods We Serve in Menlo Park
Our crews work throughout Menlo Park, from the Baylands-adjacent homes in Belle Haven to the hillside properties in Sharon Heights and the established ranch neighborhoods near downtown. Most locations in Menlo Park are within 30 minutes of our dispatch point, and we schedule to minimize traffic impact on the 101 corridor.
- Belle Haven
- The Willows
- Sharon Heights
- Downtown Menlo Park
- Suburban Park
Service Area - Cities Near Menlo Park
We serve the full Peninsula corridor, with regular work in Atherton, CA to the north, Palo Alto, CA to the south, Redwood City, CA to the northwest, and Portola Valley, CA to the southwest. Scheduling is coordinated from our San Francisco Bay Area office with local crews dispatched to each city.
Serving Menlo Park, CA - Our Local Coverage Area
We’re based in the Menlo Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Menlo Park
We typically schedule estimates within 2-3 business days, with emergency situations like water intrusion in a crawl space addressed same day when possible. A live person answers calls 24/7, and you’ll receive a text when your technician is en route under Haven Standard: Arrive on schedule.
Permits are required for wall insulation and any work triggered by a Title 24 whole-house renovation. Attic insulation and air sealing in existing homes usually do not require permits unless the project involves structural modification or electrical work. We flag permit requirements in your written estimate before work starts.
Yes, we provide the documentation Menlo Park HOAs typically require: proof of insurance, written scope of work, material specifications, and photos of completed work. We schedule inspections to accommodate HOA notification windows and provide the photo record directly to your board if requested.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Menlo Park Customers Say
"Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P."Fixed price, clean work, and they hauled the old material away as agreed."
- Todd M."Two other companies quoted to blow more insulation on top of what was there. These were the only ones who said the existing material had to come out first, and explained why."
- Clifford E.